|
 | MORCO D61E MULTIPOINT GAS WATER HEATER 314DVR000002
Stylish design incorporating diverter hood. Automatic ignition and flame failure on all burners. Two burner control accommodates a wide variation of ambient water temperatures and can heat 6 litres of water in a minute. Safety features include a water spillage device and easy drain down.
Specification:
Gas type: Butane 28mbar, Propane 37mbar
Heat output: 8.7kW
Gas consumption: 0.8kg/h
Water pressure: Min 1 bar, Max 10bar
Connections: Gas 15mm compression, Water 15mm straight copper
Weight:7.1kg
Dimensions:573mm x 266mm x 190mm
Flue size:83mm
This is a multi-point heater
[PDF Datasheet] [More Info]
|
Price: £205.63 (Including: VAT) |
Qty: |
| |
| |
|
 | MORCO UNIVERSAL FLUE KIT 314ACC000003
For use with Morco D61B,Rinnai, All Paloma, All Vaillant 125, Morco Major, Saunier Duval SD14.
For use with Burden ref: 017570.
Height of this item is 605mm.
Kit contains 605mm flue including cowl,inner tube and flange.
|
Price: £38.41 (Including: VAT) |
Qty: |
| |
| |
|
![RINNAI WATER HEATER (REU580]](359926_150.jpg) | RINNAI WATER HEATER (REU580] 314HTR000001
Highly efficient multipoint instantaneous gas heater. One push electronic system, flame failure device and low pressure cut out. Will heat water at a rate of 25 degrees C, rise in temperature per minute for each 5.1 litres delivered making this the ideal unit for use with a shower.
Dimensions: 389mm (height) x 305mm (width) x 160mm (depth)
|
Price: £209.98 (Including: VAT) |
Qty: |
| |
| |
|
 | RINNAI DRAUGHT DIVERTOR 58 314DVR000001
| Large Image
|
Price: £38.48 (Including: VAT) |
Qty: |
| |
| |
|
 | 1KW 240V IMMERSION HEATER 314HTR000002
11" elements with built in Thermostat. The thread for the immersion heater is 2 1/4" BSP
Large Image
|
Price: £25.03 (Including: VAT) |
Qty: |
| |
| |
|
 | CIMM 5 LITRE ACCUMULATOR TANK CONFORMS: 97/23/EC prEN 13831 406ACC000002
Large Image
|
Price: £22.00 (Including: VAT) |
Qty: |
| |
| |
 | Albion Marine Calorifiers Technical Specification
3 Bar Max Working Pressure (test pressure 5.17 Bar)
Connections: 2 x 3/4" BSP Male Primaries (Heat Source)
2 x 1/2" BSP Male Secondaries (Domestic Supply)
1 x 1/2" BSP Male Connection for Pressure Relief Valve
1 x 2.1/4" BSP Female for immersion heater.
Coils: 22mm Copper tube with a capacity to raise the contents of the calorifier from 10°C to 60°C within 20 minutes* when using primary water at a flow of 82°C. *Depends on engine tank size relationship.
Insulation: 20mm nominal thickness CFC and HCFC free foam insulation. |
|
Complies with BS1566 Part 1: 1984
• Comes complete with immersion plug & 3 Bar pressure relief valve (PRV).
PLEASE NOTE: Twin Coil Units will require 2 lots of Primary Heat Source feed connection which are possibly of different type and size.
Dimensions do not include foam - add 40mm [1.1/2"] to overall diameter |  |
|
|
|
|
|
|
|
|
|
|
|
 | THERMOSTATIC MIXING VALVE KIT 313THM000001
For top mount installation: A kit that automatically maintains the desired hot water outlet temperature by mixing hot & cold water Larger Image
|
Price: £32.37 (Including: VAT) |
Qty: |
| |
| |
|
 | PH 5 FLUE PIPE 314CWL000002
| Large Image
|
Price: £17.38 (Including: VAT) |
Qty: |
| |
| |
|
 | PH 5 FLUE COWL 314CWL000001
| Large Image
|
Price: £34.51 (Including: VAT) |
Qty: |
| |
| |
Awaiting product information and images
from the Manufacturer for the following products |
|
|
|
|
|
All Trademarks acknowledged as the property of their respective owners. Product information, specification and prices as supplied by the Manufacturers and subject to change without prior notification. Images for illustrative purposes only. E. & O.E.
Chandlery World
Bridge House Marina
Nateby Crossing Lane, Nateby, Garstang, Lancashire, PR3 0JJ, UK
tel: +44 (0)1995 603374 ~ fax: +44 (0)1995 601612
Site designed, hosted and managed by Univiz
