|
Vetus Waterlocks & Mufflers |  |
|
The latest generation of VETUS waterlocks, type NLP are made of injection-moulded plastic materials, making them lightweight, durable and corrosion proof. These NLP waterlocks are of dual stage construction, featuring upper and lower chambers with a horizontal partition plate and a riser tube through the centre. Compared with single stage waterlocks using only one chamber, these NLP waterlocks offer superior silencing of exhaust noise with minimal back pressure. Since the top chamber may be rotated through 360° and both the inlet and the outlet connectors can rotate through 360°, installation of the exhaust assembly even in confined engine spaces is greatly simplified. |
|
 | Vetus Waterlock / Mufflers NLP 40 - 45 - 50 Suitable for exhaust hose with inside diameter of resp. Ø 40 mm, Ø 45 mm or Ø 51 mm. Provided with drain plugs (for winter storage). Straps to secure the waterlock to the boat are supplied as standard. The inlet and outlet hose connectors rotate through 360°. The upper and lower chambers can also be rotated 360°, enabling the NLP to be easily and quickly installed in almost any type of boat. Capacity 4.5 |
|
|
|
|
 | Vetus Waterlock / Mufflers NLP 50S - 60 - 75 - 90 Suitable for exhaust hose with inside diameter of resp. Ø 51 mm, Ø 60 mm, Ø 75 mm or Ø 90 mm. Provided with drain plugs (for winter storage). Straps to secure the waterlock to the boat are supplied as standard. The inlet and outlet hose connectors rotate through 360°. The upper and lower chambers can also be rotated 360°, enabling the NLP to be easily and quickly installed in almost any type of boat. Capacity 10 litres. |
|
|
|
|
|
|
 | VETUS PLASTIC WATERLOCK TYPE LP30 FIXED INLET 128WLKWLOCKLP30
Suitable for exhaust hose with 30 mm I.D. Provided with a drain plug for winter storage. | Large Image
|
Price: £65.51 (Including: VAT) |
Qty: |
| |
| |
 | Vetus Waterlock LP40R / LP45R / LP50R For exhaust hose with internal diameters of 40 mm, 45 mm or 51 mm I.D. Provided with a plug for draining during winter time. The inlet connection of these 3 models will revolve through 360°, which greatly facilitates the installation of the exhaust assembly. |
|
|
|
|
 | Vetus Waterlock LP50S / LP60 / LP75 / LP90 For exhaust hose with internal diameters of 51 mm, 60 mm, 76 mm or 90 mm I.D. The smaller model L50R, shown above, is to be used when the exhaust line is relatively short, whereas
the larger model LP50S comes into proper use with a long length of exhaust hose. These waterlocks are provided with a drain plug. |
|
|
|
|
|
 | Vetus Muffler MP40 / MP45 / MP50 MP60 / MP75 Available for exhaust hoses of Ø 40 mm, 45 mm, 51 mm, 60 mm or 75 mm I.D. This muffler creates additional mixing of the water inside the exhaust line, which results in even better noise reduction. The construction of the muffler causes almost no resistance to the free flow of the exhaust gases. |
|
|
|
|
|
|
 | Vetus Muffler MP90 / MP100 Available for exhaust hoses of Ø 90 mm or 102 mm I.D. This muffler creates additional mixing of the water inside the exhaust line, which results in even better noise reduction. The construction of the muffler causes almost no resistance to the free flow of the exhaust gases. |
|
|
|
 | Vetus Plastic Goosenecks LT40 / LT 45 / LT50 / LT60 Available for
exhaust hose of
Ø 40 mm,
Ø 45 mm,
Ø 51 mm or
Ø 60 mm I.D. |
|
|
|
|
|
 | Vetus Plastic Goosenecks LT75 / LT90 / LT102 / LT127 / LT152 Available for exhaust hose of Ø 76 mm, Ø 90 mm, Ø 102 mm Ø 127 mm or Ø 152 mm I.D.
Stainless steel fastening brackets are supplied as standard with these goosenecks. |
|
|
|
|
|
|
|
|
|
|
 | Vetus Waterlocks for Long Exhaust Systems - Type LSG Sometimes, notably in the case of sailing yachts, the exhaust line is so long that an extra large waterlock is needed to prevent the large volume of water in the line from running back into the engine once it has been stopped. VETUS waterlocks type LSG and LSS are the ideal solution for boats sailing in rough waters, without the engine running. To simplify installation of these waterlocks, both the inlet and outlet stubs will rotate through 360 degrees. They are also fitted with a drain plug for winter storage. It is possible to fit a sensor for an exhaust temperature alarm into the inlet hose connection of the LSG. Model LSS features a reduced height of 225 mm, thus enabling easy installation under floor.
Capacity : 17 litres
Hose connection: Ø 60, 75 or 90 mm.
With check valve and the inlet/outlet stubs will rotate through 360 degrees
|
|
|
|
|
 | Vetus Waterlocks for Long Exhaust Systems - Type LSS Sometimes, notably in the case of sailing yachts, the exhaust line is so long that an extra large waterlock is needed to prevent the large volume of water in the line from running back into the engine once it has been stopped. VETUS waterlocks type LSG and LSS are the ideal solution for boats sailing in rough waters, without the engine running. To simplify installation of these waterlocks, both the inlet and outlet stubs will rotate through 360 degrees. They are also fitted with a drain plug for winter storage. It is possible to fit a sensor for an exhaust temperature alarm into the inlet hose connection of the LSG. Model LSS features a reduced height of 225 mm, thus enabling easy installation under floor.
Capacity : 71/2 litres
Hose connection: Ø 40, 45 or 50 mm. Inlet and outlet stubs will rotate through 360 degrees.
|
|
|
|
|
 | Vetus Waterlocks for Exhausts of 90 - 250mm Type MGL / MGS / MGP Type MGL, MGS and MGP |
|
|
|
|
|
|
|
|
|
|
|
