|
Vetus Waste Water Tanks |  |
|
 | Vetus Rigid Tanks for Waste Water Owing to the special odour impermeable material used and to the thick wall construction, these VETUS waste water tanks are designed for the temporary storage of ”black water” (toilet waste). The waste water tank will need an inlet connection for each toilet, shower, washbasin etc. A connection kit BTKIT, “no-smell” sanitary hoses and angled connectors for inlet and tank
ventilation in various diameters may be ordered separately to suit your requirements. Please note that to prevent unpleasant odours, we recommend the use of separate tanks for ”black water” and ”grey water” waste. When a marine toilet is connected to the tank the use of VETUS odour tight sanitation hose is an absolute must. Other accessories such as deck plates, extraction pipes, hoses etc. may be ordered separately as required. The use of a VETUS diaphragm pump is recommended to empty the tank. This type of pump is not prone to clogging with semi-solid waste.
Waste water tanks are supplied with the following connections:
Fixed hose connector ø 19 mm for the breather line.
Rotating hose connector ø 38 mm with pick-up pipe, for waste water suction. A Ø 42 mm hole is provided for easy installation of an inlet fitting, type RT..B. This should be ordered separately according to the inlet hose diameter. If required, additional inlet fittings may also be installed. These tanks come complete with a screw down inspection lid installed. |
|
|
|
|
|
|
|
|
|
|
 | Vetus Bulkhead Mounted Waste Water Tanks These tanks are available in two sizes, with capacities of approximately 60 or 80 litres. The tanks are made of odour impermeable polythene and the contents level can be seen from outside.
They come complete with the following components installed:
- Suction pipe with ø 38 mm angled hose connector, for connection to deck plate
- Angled hose connector, ø 38 mm, for discharge
- Inspection cover
- Angled hose connector, ø 19 mm, for tank ventilation (breather)
- Two securing straps
Angled inlet connectors can be ordered separately. One hole has already been provided, to
connect the inlet fitting. These tanks are suitable for mounting under the side decks, above the waterline. When permitted, the contents of the tank can be gravity discharged at sea, without the assistance of a pump. Simply opening the sea cock will empty the tank. Provided with ISO 8099 identification. |
|
|
|
 | Vetus Waste Water Tank Systems The tanks are made of odour impermeable polythene. The system comes complete with a VETUS waste water pump, shown below (12 or 24 V), an inspection cover, a tank gauge sender (the 12 or 24 Volt level gauge must be ordered separately, a plastic suction pipe with angled hose connection, ø 38 mm, for discharge from ashore, two securing straps and one ø 19 mm connection for the breather. Angled connectors for the input of waste water must be ordered separately. One hole has already been provided, to connect the inlet fitting. These waste water systems are designed to save on space and installation time and are available
with tank capacities of 42, 61 or 88 litres. All input and discharge connections are accessible at the top of the tank. Provided with ISO 8099 identification. Model WWS is not only suitable for storing “black” water, but also for “grey” waste water. |
|
|
|
|
|
 | Vetus Extraction Pipes For both “grey” and “black” waste water tanks, VETUS can supply extraction pipes. with the following features:
• For electrically or manually operated diaphragm pumps or direct connection to deck plate.
• With angled connections of Ø 38 mm
• With a tube length of either 370 or 780 mm (which can be cut to the required length). |
|
|
|
 | Vetus Fitting Kits for Plastic Waste Water Tanks Connection Kit consisting of:
- 2 securing straps
- 1 inspection lid
- 1 angled suction tube, Ø 38 mm x 370 mm or 780 mm long
- 1 key |
|
|
![Vetus No-Smell Filters for Toilet Waste Tanks ["Black Water"]](NSF_150.jpg) | Vetus No-Smell Filters for Toilet Waste Tanks ["Black Water"] Each waste water tank requires an air breather line, through which unpleasant odours may escape. This can be prevented by the installation of a VETUS No-Smell filter into the breather line. The No-Smell filter element contains a special odour-absorbing material. The filter can be installed very easily. Model NSF is available with connectors for ø 16 mm, 19 mm, 25 mm or 38 mm breather hose. The special VETUS waste water hose, made of reinforced PVC is excellently suited as breather hose. The filter element is exchangeable and should be renewed
once a year. Dimensions: l x w x h : 148 x 150 x 162 mm.
|
|
|
|
|
|
|
 | VETUS SMALL NO-SMELL WASTE WATER FILTER, SUITABLE FOR 16 MM VENT HOSE ONLY 440FLTNSF16S
Each waste water tank requires an air breather line, through which unpleasant odours may escape. This can be prevented by the installation of a VETUS No-Smell filter into the breather line. The No-Smell filter element contains a special odour-absorbing material. The filter can be installed very easily. The special VETUS waste water hose, made of reinforced PVC is excellently suited as breather hose. The filter element is exchangeable and should be renewed once a year. Dimensions: l x w x h: 107 x 111 x 111 mm.
|
Price: £64.92 (Including: VAT) |
Qty: |
| |
| |
|
 | VETUS PLASTIC 3-WAY BALL VALVE FOR HOSE 38 MM 423VLVVALVE38
Made of plastic
|
Price: £74.32 (Including: VAT) |
Qty: |
| |
| |
|
 | VETUS PLASTIC Y-CONNECTOR FOR HOSE 38 MM. 431CNTYCONN38
made of plastic, ø 38 mm
|
Price: £47.88 (Including: VAT) |
Qty: |
| |
| |
|
 | VETUS ANTI- SIPHON BREATHER KIT FOR 38 MM HOSE, INC SKIN FITTING, CLAMPS & 2 METRES BREATHER HOSE 456TNKAIRVH38
Breather, suitable for Ø 38 hose. Plastic housing. Comes complete with skin fitting, hose clamps and 2 metres of
breather hose.
|
Price: £89.30 (Including: VAT) |
Qty: |
| |
| |
|
 | VETUS VACUUM VALVE, 56 MM DIAMETER, FOR WASTE WATER TANKS 423VLVVRF56
If a waste water tank is being emptied using a powerful shore based pump-out station, it is possible that insufficient air enters through the vent line causing the tank to implode. To prevent this possibility, this VETUS valve type VRF will automatically open with the increasing vacuum, thus letting air into the tank. Model VRF 56 has a free flow area of more than 1100 mm2 and thus fulfils the requirements of the relevant ISO 8099 standard. The hole in the tank must be ø 56 mm, which is the same size as the hole for a VETUS extraction pipe. This valve is an indispensable safety factor if the vent line has a smaller diameter than ø 19 mm, or for tanks of more than 400 litres, a vent line less than ø 38 mm. By using this valve, the necessity to fit a large diameter vent line is avoided, thus saving cost and space whilst still meeting the ISO 8099 standard. This valve is made entirely from synthetic materials and therefore absolutely corrosion-free.
|
Price: £23.21 (Including: VAT) |
Qty: |
| |
| |
 | Vetus Waste Water Level Indicators - Black Dials Available in Black and Chrome Bezels and for 12 or 24 Volt D.C.
The waste water indicator WASTEB can be provided with an interface (code EP412326), suitable for 12 and 24 V installations. A warning light can be connected to this interface, which will then indicate when the holding tank is almost full and that it is better not to use the toilet. |
|
|
|
 | Vetus Waste Water Level Indicators - Cream Dials Available in Black and Chrome Bezels and for 12 or 24 Volt D.C.
The waste water indicator WASTEW can be provided with an interface (code EP412326), suitable for 12 and 24 V installations. A warning light can be connected to this interface, which will then indicate when the holding tank is almost full and that it is better not to use the toilet. |
|
|
|
|
 | VETUS WASTE WATER SENSOR 12/24 V 038SNDWWSENSORA
The arm length is adjustable between 200 and 412 mm.
|
Price: £128.08 (Including: VAT) |
Qty: |
| |
| |
 | Vetus Waste Water Hoses Made of PVC, coloured white, with steel spiral inlay. Suitable for temperatures of between – 5° C and + 60° C. |
|
|
|
|
|
|
|
|
|
|
|
|
|
Awaiting product information and/or images
from the Manufacturer for the following products |
|
|
|
|
|
|
