|
Vetus Hydraulic Steering Systems, 30 - 175 KGM Many VETUS clients like to determine the cylinder/pump unit combination themselves so as to arrive at the required number of steering wheel revolutions. Note: the smaller the number of revolutions, the more force must be applied to the steering wheel. |  |
|
 | Single Hydraulic Steering Position Requirements: One steering pump with or without built-in nonreturn valves.
One cylinder.
Hydraulic tubing (plus accessory fittings, as required).
Hydraulic fluid
Options:
separate dual non-return valve
by-pass valve |
|
 | Dual Hydraulic Steering Position Requirements Two steering pumps with built-in non-return valves.
Alternatively: two steering pumps without non-return valves, in which case a separate dual non-return valve block must be fitted.
One cylinder.
Hydraulic tubing (plus accessory fittings, as required)
Hydraulic fluid
Option: by-pass valve |
|
|
 | VETUS HYDRAULIC CYLINDER TYPE MTC30, FOR 8 MM TUBING, (INCL. 8MM CONNECTORS) 149CYLMTC3008
| Large Image and Technical Specification
|
Price: £219.73 (Including: VAT) |
Qty: |
| |
| |
|
|
 | VETUS HYDRAULIC CYLINDER TYPE MTC52, FOR 10 MM TUBING, (INCL. 10 MM CONNECTORS) 149CYLMTC5210
| Large Image and Technical Specification
|
Price: £245.58 (Including: VAT) |
Qty: |
| |
| |
|
|
 | VETUS HYDRAULIC CYLINDER TYPE MTC72, FOR 10 MM TUBING, (INCL. 10 MM CONNECTORS) 149CYLMTC7210
| Large Image and Technical Specification
|
Price: £263.20 (Including: VAT) |
Qty: |
| |
| |
|
|
 | VETUS HYDRAULIC CYLINDER TYPE MTC125, FOR 10 MM TUBING, (INCL. 10 MM CONNECTORS) 149CYLMTC12510
| Large Image and Technical Specification
|
Price: £366.60 (Including: VAT) |
Qty: |
| |
| |
|
|
 | VETUS HYDRAULIC CYLINDER TYPE MTC175, FOR 10 MM TUBING, (INCL. 10 MM CONNECTORS) 149CYLMTC17510
| Large Image and Technical Specification
|
Price: £399.50 (Including: VAT) |
Qty: |
| |
| |
|
 | Vetus Hydraulic Steering Pumps HTP20 without Non-Return Valves Capacity: 19,7 cm3/rev.
Number of pistons: 5
Weight without valve: 3.3 kg |
|
|
|
|
|
 | Vetus Hydraulic Steering Pumps HTP20 with Integral Non-Return Valve and Pressure Relief Valve Capacity: 19,7 cm3/rev.
Number of pistons: 5
Weight with valve: 4,1 kg |
|
|
|
|
|
| | Vetus Hydraulic Steering Punps HTP30 without Non-Return Valves Capacity: 30,0 cm3/rev.
Number of pistons: 5
Weight without valve: 3.3 kg
Weight with valve: 4,1 kg |
|
|
|
|
|
| | Vetus Hydraulic Steering Pumps HTP30 with Integral Non-Return Valve and Pressure Relief Valve Capacity: 30,0 cm3/rev.
Number of pistons: 5
Weight with valve: 4,1 kg |
|
|
|
|
|
|
|
| | Vetus Hydraulic Steering Pumps HTP42 without Non-Return Valves Capacity: 42,0 cm3/rev.
Number of pistons: 7
Weight without valve: 3.3 kg
Weight with valve: 4,1 kg |
|
|
|
| | Vetus Hydraulic Steering Pumps HTP42 with Integral Non-Return Valve and Pressure Relief Valve Capacity: 42,0 cm3/rev.
Number of pistons: 7
Weight with valve: 4,1 kg |
|
|
|
 | Vetus Tilting Steering Pumps Type HTPT These steering pumps are provided with a tilt mechanism, allowing the steering wheel to be locked in 5 different positions, over an arc of 48°. This device ensures that the steering wheel can be adjusted to suit both seated and standing steering positions. The steering wheel shaft is made of stainless steel. All other visible parts are made of black rubber or corrosion free synthetic material. These pumps are supplied with built-in non return valves and pressure relief valve and feature the same technical specifications as type HTPR steering pumps. This pump is designed for through bulkhead installation. Weight: 6,6 kg. A special filler cap kit is available as an option, for use with the tilting steering pumps type HTPT . With this kit it is possible to position the filler cap in a convenient location, so that the pump can be filled and the fluid level easily checked. |
|
|
|
|
|
|
|
 | VETUS CYLINDER TYPE MTC7210SL FOR TRANSOM HUNG RUDDERS 149CYLMTC7210SL
Stroke: 225 mm
Volume: 146 cm3
Length of rudder arm: 196 mm
Weight : 3 kg.
|
Price: £263.20 (Including: VAT) |
Qty: |
| |
| |
