|
Vetus Hoses for Marine applications Vetus marine hoses fulfil all current legislation for use on board. On top of that, they are highly flexible and resistant against a variety of internal or external influences. |  |
|
 | Vetus Drinking Water Hoses Suitable for transportion of drinking and grey water on board, both suction and pressure. Made of trasnparent PVC with spiralled steel inlay. Tasteless and non-toxic. Temperature-proof between -5 and +65 degree C |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 | Vetus Fuel Hoses ISO 7840 Marine Fuel A1 For transportation of fuel, from tank to e.g. fuel filter, or to serve as ventilation line. Available as quality type A1, suitable for both petrol and diesel. Inside made of NBR rubber, outside of CR rubber. Provided with an inlay of woven synthetic fabric.
Fuel hoses which fulfil the requirements of Marine Fuel A1 have been successfully subjected to a fire test for 2.5 minutes and have a maximum permeability of 4 grams/m2/hour. Fuel hoses which fulfil the requirements of Marine Fuel A2 have been successfully subjected to a fire test for 2.5 minutes and have a maximum permeability of 12 grams/m2/hour. |
|
|
|
|
|
|
|
|
|
|
|
|
|
 | Vetus Waste Water Hoses Made of PVC, coloured white, with steel spiral inlay. Suitable for temperatures of between – 5° C and + 60° C. |
|
|
|
|
|
|
|
|
|
|
|
|
|
 | Vetus Impermeable Sanitory Hoses "No-Smell" Especially recommended for transportation of biological waste, e.g. in combination with (marine) toilet installations. Made of SBR rubber with inlays of woven synthetic fabric and steel spiral. With-stands temperatures of between - 40° C and + 70° C. Available in coils of 20 m |
|
|
|
|
|
|
|
|
|
|
|
 | Vetus Hose for Calorifiers and Hot Water Transport Suitable for drinking water and temperature resistant between -30°C and +160°C. Therefore most suited for use with calorifier and hot water systems. Made of EPDM rubber with an inlay
of woven synthetic fabric. |
|
|
|
|
|
 | Vetus Water Cooling Hose Applications:
• Suction and transportation of cooling water from outside (such as, connection skin fitting - cooling water strainer - cooling water pump)
• Transportation of warm cooling water (e.g. between engine and keel cooler)
Cooling water hose
• Suitable for suction and pressure
• Suitable for salt and fresh water
• Suitable for all cooling fluids
• Temperature resistant between -30° C and +120°C
• Made of EPDM-rubber, with synthetic fabric and spiralled steel reinforcement
• Operating pressure: 2,5 bar maximum |
|
|
|
|
|
|
|
|
|
|
|
 | Vetus Fuel Filling Hoses This type of hose is made of NBR rubber with spiralled steel inlay.
Suitable for both petrol and diesel fuels.
Temperature resistant between -30°C and + 100°C.
Meets the requirements of SAE J 1527 and ISO 7840-MARINE FUEL A2.
Extremely flexible. |
|
|
|
|
|
 | Vetus Blower / Ventilator Hoses This type of hose is made of a woven glass fibre fabric, impregnated with PVC.
Suitable for VETUS blowers.
Withstands temperatures of between – 20° C and + 100° C |
|
|
|
 | Vetus Hoses for Air Conditioning Units Suitable for fluids in closed heating and/or cooling systems, such as air conditioning, central heating or combined cooling/heating systems.
Temperature resistant between +3° C and + 80° C.
For transportation of water and cooling fluids. Available in coils of 20 m. Made of EDPM rubber with inlay of woven reinforcement material.
When used with air conditioning units, an insulating sleeve is required in order to avoid condensation
on the outer surface of the hose. This is made of a combination of polythene and rubber, with a closed cell structure, and is available in 2 metre lengths. |
|
|
|
|
|
|
|
 | Vetus Rubber Exhaust Hoses - Rina approval ISO 13363 VETUS RINA approved exhaust hoses have Rina's approval and meet the requirements of ISO 13363
Available with internal diameters from Ø 30 to 150 mm. and available in 20mtr lengths only.
In order to reduce back pressure in the engine, the inside of all VETUS exhaust hoses is completely flush
and smooth.
Thanks to increased spiral reinforcement and a more supple type of rubber, VETUS exhaust hoses are now even stronger, as well as more flexible. Exhaust hoses with an internal diameter of up to Ø 152 mm inclusive, have a bending radius of no more than 1.5 x the diameter. Exhaust hoses with an internal diameter of more than Ø 152 mm, have a bending radius of two times the diameter of the hose. By virtue of this increased flexibility, valuable installation time will be saved. VETUS exhaust hoses have Lloyd’s Register of Shipping approval and also meet the requirements of the SAE J2006 R2 standard. They are temperature resistant between -30° and + 100° C, with brief peak temperatures of 115° C. |
|
|
|
|
|
|
|
|
|
|
|
|
|
 | Vetus Rubber Exhaust Hoses - Lloyd's approval and SAE J2006 R2 VETUS exhaust hoses have Lloyd’s approval and meet the requirements of SAE J2006 R2.
Available with internal diameters from Ø 30 to 304 mm.
In order to reduce back pressure in the engine, the inside of all VETUS exhaust hoses is completely flush
and smooth.
Thanks to increased spiral reinforcement and a more supple type of rubber, VETUS exhaust hoses are now even stronger, as well as more flexible. Exhaust hoses with an internal diameter of up to Ø 152 mm inclusive, have a bending radius of no more than 1.5 x the diameter. Exhaust hoses with an internal diameter of more than Ø 152 mm, have a bending radius of two times the diameter of the hose. By virtue of this increased flexibility, valuable installation time will be saved. VETUS exhaust hoses have Lloyd’s Register of Shipping approval and also meet the requirements of the SAE J2006 R2 standard. They are temperature resistant between -30° and + 100° C, with brief peak temperatures of 115° C. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Product Images and information currently being prepared for this section |
|
|
