|
Vetus Flexible Engine Mountings |  |
|
All Vetus Engine Mountings Absorb the Propeller Thrust The torque of an engine is one of the deciding factors for determination of the load applied to the engine mounts. When more powerful engines are installed, it is important to use the following formula to define the load per support in kg (4 supporting points).
|
engine weight in kg |
+ HP x 358 x reduction of gearbox |
= max. load per |
|
number of supports |
engine revs/min.x centre to centre spacing in metres of the longitudinal engine bearers |
support in kg |
|
|
|
 | VETUS FLEXIBLE ENGINE MOUNTING TYPE K25 126MNTKSTEUN25
These flexible engine mountings are suitable for marine diesel engines in the power range between 4 KW and
15 KW (6 HP - 20 HP) and are standard supply with the VETUS marine diesel engines M 2.C5
Application: small engines and generator sets with 1 or 2 cylinders.
This flexible mounting contains a special rubber compound with excellent vibration damping properties. | Technical Specification
|
Price: £34.66 (Including: VAT) |
Qty: |
| |
| |
|
 | VETUS FLEXIBLE ENGINE MOUNTING TYPE K40 126MNTKSTEUN40
These flexible engine mountings are especially designed for 3-cylinder marine diesel engines and are standard supply with the VETUS marine diesel engine model M3.28
The relatively soft rubber compound of these flexible mountings fulfils precisely the requirements of light-weight vessels, equipped with a modern 3-cylinder marine diesel engine, with regard to the insulation of vibrations. The rubber elements are especially shaped to create the optimum in vibration dampening. The VETUS flexible engine mounting type K40 features internal buffers, which limit the engine movement when started or stopped and it is also secured against overload and shearing off. | Technical Specification
|
Price: £65.80 (Including: VAT) |
Qty: |
| |
| |
 | Vetus Flexible Engine Mountings Type K For smaller engines, up to appr. 60 kW (80 HP)
These engine mountings are standard supply with the VETUS marine diesel engines M 4.15 and M 4.17 |
|
|
|
|
 | Vetus Flexible Engine Mountings Type LMX These flexible engine mountings are suitable for marine diesel engines in the power range between 70 KW and 350 KW (95 HP - 480 HP). These vibration dampers are standard supply with the VETUS marine diesel engines
model DT44 and above.
The VETUS flexible engine mounting type LMX has designed with particular regard to the power to weight ratio of modern diesel engines, which is of ever-growing importance. In other words: the weight of an engine, in comparison to its thrust, has become lower and lower. For these engine types, the VETUS flexible engine mounting type LMX possesses the following ideal characteristics:
• The ample vertical compression guarantees optimum damping of vibrations, even at idling revs.
• The horizontal fore and aft stiffness is very high, which allows the acceptance of considerable thrust.
• The cushioning of vibrations in horizontal direction athwartships is of equal excellence. |
|
|
|
|
|
 | Vetus Flexible Engine Mountings Type HY These flexible engine mountings for heavy-weight engines with 4 or mor cylinder are suitable for marine diesel engines in the power range between 30 KW and 125 KW (40 HP - 170 HP) and are standard supply with the VETUS marine diesel engines VH 4.65 and VH 4.80
The VETUS vibration damper model HY is extremely suitable for application with marine diesel engines, by virtue of a low vertical stiffness, combined with high stiffness in the longitudinal direction. This sturdy vibration damper is suitable for engines in the power range between 30 and 125 kW, whether or not provided with a thrust bearing. |
|
|
|
|
|
 | VETUS HYDRAULIC ENGINE MOUNTING 126MNTMITSTEUN
These engine mountings are standard supply with the VETUS marine diesel engine M 2.06
This hydro-damper is a combination of a conventional rubber-metal damper and a hydraulic shock absorber. Especially for engines with 1, 2 or 3 cylinders, producing many horizontal and vertical movements, the VETUS hydro-damper is an absolute sensation: the reduction of vibration and noise is truly staggering. The maximum static load per support is 60 kg and the maximum thrust per support is 50 kg. In other words: dependent on gearbox ratio, number of revolutions, propeller diameter etc., these mountings are suitable for engines of up to 18 - 26 kW (25 - 35 HP). | Technical Specification
|
Price: £65.80 (Including: VAT) |
Qty: |
| |
| |
All Trademarks acknowledged as the property of their respective owners. Product information, specification and prices as supplied by the Manufacturers and subject to change without prior notification. Images for illustrative purposes only. E. & O.E.
Chandlery World
Bridge House Marina
Nateby Crossing Lane, Nateby, Garstang, Lancashire, PR3 0JJ, UK
tel: +44 (0)1995 603374 ~ fax: +44 (0)1995 601612
Site designed, hosted and managed by Univiz
