|
Vetus Marine Fittings Bollards | Cleats | Deck Entries | Deck Plates | Locks | Railings | Grab Rails | Hatch Adjusters | Skin Fittings | Stanchions | Ball Valves | Water Scoops | Hose Pillars | Breather Nipples | Hose Nipples | Impellers | Plug and Sockets | Sump Pump |  |
|
 | Vetus Achilles Bollards with Baseplates Available in various sizes.
Maximum safe working load
Achilles090 : 620 kgf
Achilles110 : 1150 kgf
Achilles130 : 1150 kgf
Achilles150 : 1800 kgf
Achilles160 : 2629 kgf |
|
|
|
|
|
 | Vetus Achilles Welding Bollards without Baseplate As above but without the baseplate for direct welding |
|
|
|
|
|
|
 | Vetus Stainless Steel (AISI 316) Taurus Cleats These cleats are made of high-gloss polished stainless steel (AISI 316). With the exception of model TAURUS 06, all cleat base plates are tapped on the underside so that the fastenings will be concealed under-deck. Model TAURUS06 has 4 countersunk holes in the base plate to take M12 fastenings. |
|
|
|
|
|
|
|
Vetus Stainless Steel Deck Entries (AISI 316) - Slotted Opening Stainless Steel AISI 316 Deck Entries, with Watertight Slotted Cover |
|
|
|
|
|
|
|
|
 | VETUS KEY FOR STAINLESS STEEL (AISI 316) DECK ENTRIES WITH SLOTTED COVER 258DCKKEY
Key for Slotted Stainless Steel Deck Entries
|
Price: £5.29 (Including: VAT) |
Qty: |
| |
| |
 | Vetus Stainless Steel Deck Entries (AISI 316) with Winch Handle Socket Stainless Steel AISI 316 Deck Entries, with Winch Handle Socket |
|
|
|
|
|
|
 | Vetus Chromium Plated Brass Deck Plates Available for Water, Fuel and Waste Water in for 38mm and 50mm hoses |
|
|
|
|
|
 | Vetus Push Button Lock Made of plastic with chromium or brass coated push-button.
Dimensions: 78 x 45 x 20 mm. |
|
|
|
 | Vetus Stainless Steel Grabrails (AISI 316) Stainless Steel Grabrails (AISI 316)
Railing tube available in diameters of 20 mm or 25 mm. Max. length 6 m.
End and centre supports (ø 20 or 25 mm) are supplied separately. |
|
|
|
|
|
|
|
|
|
 | Vetus Stainless Steel Hatch Adjusters Available in two length ranges |
|
|
|
 | Vetus Stainless Steel AISI 316 Skin Fittings Skin Fittings in AISI 316 Stainless Steel
Available in sizes G 1.2 to G 2 inclusive |
|
|
|
|
|
|
|
 | Vetus Brass Skin Fittings Vetus Brass Skin Fittings available in various sizes |
|
|
|
|
|
|
|
|
|
|
![Vetus Bronze Skin Fittings [Bronze ISO CUPB5SN5ZN5]](THRUB12_150.jpg) | Vetus Bronze Skin Fittings [Bronze ISO CUPB5SN5ZN5] Available in various sizes |
|
|
|
|
|
|
![Vetus Delrin [White] Skin Fittings](DOORN_150.jpg) | Vetus Delrin [White] Skin Fittings Available in various sizes |
|
|
|
|
|
|
 | Stainless Steel Stanchions (AISI 316) Stainless Steel Stanchions (AISI 316)
Tapered with 2 wire holes at 300 mm spacing, except for 450 mm model which has only 1 hole.
Diameter: 25 mm
Length: 450, 500, 550, 610 and 750 mm. |
|
|
|
|
|
|
 | Stainless Steel Stanchion Sockets (AISI 316) Stainless Steel Stanchion Sockets (AISI 316)
Ø 25 mm, 90° straight or with 6° angle.
Dimensions: (lxwxh) 90 x 67 x 60 mm. |
|
|
|
 | Vetus Stainless Steel (AISI 316) Ball Valves Available sizes: G½ to G2 inclusive. |
|
|
|
|
|
|
|
 | Vetus Bronze Ball Valves Available in various sizes |
|
|
|
|
|
|
 | Vetus Nickel Plated Brass 3-Way Full Bore Ball Valves Ball valve suitable for water and diesel fuel |
|
|
|
|
|
 | Vetus Nickel Plated Brass Full Bore Valves Suitable for water and diesel fuel |
|
|
|
|
|
|
|
|
|
|
|
 | Vetus Remote Controlled Ball Valves There is no need to compromise the safety of your boat. By fitting these VETUS ball valves with remote control, all seacocks may now be closed or opened electrically from a single central position.
The electric control units G 1/2 to G 2 can be easily unbolted from the relevant ball valve. This also facilitates the installation of the ball valve and allows the valve to opened or closed by hand in an emergency. The valves can be powered fully open or fully closed in approximately 12-15 seconds and the rated power consumption is approximately 4-15 Watts. As standard, each electrically operated valve is supplied with a ball valve, a 12 or 24 Volt remote control unit and a switch panel. These ball valves are resistant against the influences of petrol and diesel fuels. Please consult the locally applicable directives for fitting into petrol or diesel fuel lines. The electric motor is ignition protected and complies with the directive of ISO 8846. The G-threading meets the requirements of ISO 228-1 and ISO 9093-1.
Available for 12 or 24 Volt DC supply, with nickel plated brass ball valves
G 1/2, G 3/4, G 1, G 11/2 or G 2.
The housing of the electric control is watertight
according to IP 65. Dimensions (without the ball valve): 110 x 74 x 80 mm (l x w x h). |
|
 | The switch panel, shown here, is supplied as standard. The monitoring lights indicate the position of the ball valve (open or closed). The dimensions of the panel are: 78 x 47 x 19 mm. |
|
|
|
|
|
|
|
|
|
|
|
|
|
 | Vetus Stainless Steel Water Scoops Available sizes: G½ to G2 inclusive. |
|
|
|
|
|
|
 | Vetus Brass Water Scoops Available in various sizes |
|
|
|
|
|
|
|
|
|
 | Vetus Bronze Water Scoops Available in various sizes |
|
|
|
|
|
|
 | Vetus Bronze Hose Pillars Available in various sizes |
|
|
|
|
|
|
 | Vetus Brass Hose Pillars Available in various sizes |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
