|
 | Ancor Adhesive Lined Heat Shrink Butt Connectors • ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
• Shrinks to form a water tight seal and the ultimate vibration and strain relief.
• Tinned for corrosion resistance.
• Pure copper for maximum current flow.
• Brazed seam for maximum strength.
• Nylon insulator, preferred by experts, for Marine Grade resistance to sunlight, water, oil, chemicals, vibration and cut-through damage.
• UL Listed and CSA Recognized |
|
|
|
 | BLUE SEA 2306 DC100 AMP MINIBUS GROUNDING BUS BAR CE 026BSB023065
Great for limited space applications in electronic cabinets and under dashboards
CE Conformance verified for AC circuits up to 250 Volts
Dimensioned Drawing & Spec
|
Price: £3.48 (Including: VAT) |
Qty: |
| |
| |
|
 | BLUE SEA 2305 MINIBUS 100A BUSBAR 4 X 10-24 STUD TERMINAL 026BSB822305
Great for limited space applications in electronics cabinets and under dashboards
Dimensions Diagram
|
Price: £8.64 (Including: VAT) |
Qty: |
| |
| |
|
 | BLUE SEA 2304 MINIBUS 100A BUSBAR 5 x 8-32 SCREW TERMINAL 026BSB822304
Great for limited space applications in electronics cabinets and under dashboards
Large Image
|
Price: £8.10 (Including: VAT) |
Qty: |
| |
| |
|
 | BLUE SEA 2701 DUALBUS 100A BUSBAR 5 x 8-32 SCREW TERMINAL 026BSB822701
Combines negative and positive buses on one block
Continuous Amperage 100 Amperes AC/DC
Voltage Rating 300 Volts AC Maximum - 48 Volts DC Maximum
Bus Material Tin-Plated Copper CDA 110/UNS11000
Base Material ABS
Cover Material ABS
Large Image
|
Price: £10.21 (Including: VAT) |
Qty: |
| |
| |
|
 | BLUE SEA 2706 BUS BAR INSULATING COVER - USE WITH PN 2303 026BSB027063
For use with Part No:
026BSB027063 - Blue Sea 2303 150 Amp Common Bus Bar 4 x 1/4" Stud Terminal
Larger Image
|
Price: £4.85 (Including: VAT) |
Qty: |
| |
| |
|
 | BLUE SEA 2709 DUAL BUS INSULATING COVER - USE WITH PN2701 026BSB027094
Larger Image
|
Price: £5.72 (Including: VAT) |
Qty: |
| |
| |
|
 | BLUE SEA 2710 DUAL BUS INSULATING COVER - USE WITH PN 2702 026BSB027100
For use with Part No:
026BSB027063 - Blue Sea 2702 100 Amp Common Dual Bus Bar 10 x 8-32 Screw Terminals
Large Image
|
Price: £8.13 (Including: VAT) |
Qty: |
| |
| |
|
 | BLUE SEA 2714 MINI BUS INSULATING COVER - USE WITH PN 2304/2305 026BSB027148
Large Image
|
Price: £5.03 (Including: VAT) |
Qty: |
| |
| |
|
 | BLUE SEA 2702 100 AMP COMMON DUAL BUS 10 x 8-32 SCREW TERMINALS 026BSB027025
Combines negative and positive buses on one block
CE Conformance verified for AC circuits up to 250 Volts
[See next item for cover]
Dimensioned Drawing & Spec
|
Price: £13.23 (Including: VAT) |
Qty: |
| |
| |
|
 | BLUE SEA 2303 150 AMP COMMON BUS BAR 4 x 1/4 INCH STUD TERMINAL 026BSB023034
The industry standard bus for hot distribution or negative collection circuits
CE Conformance verified for AC circuits up to 250 Volts
[See next item for cover]
Dimensioned Drawing & Spec
|
Price: £13.02 (Including: VAT) |
Qty: |
| |
| |
|
 | BLUE SEA 2302 150 AMP COMMON BUS BAR 20 x 8-32 SCREW TERMINALS 026BSB023027
The industry standard bus for hot distribution or negative collection circuits
CE Conformance verified for AC circuits up to 250 Volts
Dimensioned Drawing & Spec
|
Price: £13.78 (Including: VAT) |
Qty: |
| |
| |
|
 | BLUE SEA 2106 250 AMP MAXIMUS COMMON BUS BAR 4 x 5/16 INCH STUD TERMINALS 026BSB021061
CE Conformance verified for AC circuits up to 250 Volts
Dimensioned Drawing & Spec
|
Price: £24.96 (Including: VAT) |
Qty: |
| |
| |
|
 | BLUE SEA 2105 250 AMP MAXIMUS COMMON BUS BAR 12 x #10 TERMINAL SCREWS 026BSB021054
CE Conformance verified for AC circuits up to 250 Volts
Dimensioned Drawing & Spec
|
Price: £27.17 (Including: VAT) |
Qty: |
| |
| |
|
 | BLUE SEA 2711 BUS BAR INSULATING COVER - USE WITH 2105/2106 026BSB822711
Large Image
|
Price: £6.84 (Including: VAT) |
Qty: |
| |
| |
|
 | BLUE SEA 2713 MINI BUS INSULATING COVER FOR 2304 & 2305 035BSB8-22713
Fits: 2304 & 2305
|
Price: £2.47 (Including: VAT) |
Qty: |
| |
| |
|
 | 20 TERMINAL STANDARD ELECTRICAL BUS BAR - Length: 23cm 026BSB000002
ABS Plastic Base Large Image
|
Price: £12.75 (Including: VAT) |
Qty: |
| |
| |
 | Ancor Adhesive Lined Heat Shrink Tubing • Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC.
• Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief.
• Highest shrink ratio - shrinks to 1/3 original size.
• Shrinks at 257° F/125° C.
• Operating temperature range of -40° C to 110° C. |
|
|
|
|
|
|
|
|
 | ANCOR HEAVY DUTY LUG CRIMPER 099CRI000002
|
Price: £39.16 (Including: VAT) |
Qty: |
| |
| |
 | Ancor Ring Terminals Nylon Insulated with Insulation Grip. Double Crimp, Funnel Entry. UL 486C
ANCOR TIP:
One of the most common electrical problems and potential sources of fire is a terminal that is loose on the terminal stud or loose on the wire. This creates a high resistance path and overheating. Be sure to use the proper size terminal and the proper crimp tool. Double crimp to provide strain and fatigue relief. Install ANCOR adhesive lined heat shrink tubing to water proof the connection. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
![ANCOR 230612 MULTI-STACK CONNECTOR NYLON INSULATED. WIRE RANGE: 16-14 [1-2mm] [PACK 3]](230612_150.jpg) | ANCOR 230612 MULTI-STACK CONNECTOR NYLON INSULATED. WIRE RANGE: 16-14 [1-2mm] [PACK 3] 099CNT236682
Multi-Stack Connector. Nylon Insulated with Insulation Grip
Double Crimp, Funnel Entry. UL 310. .250 tab 6.4 mm Larger Image
|
Price: £1.59 (Including: VAT) |
Qty: |
| |
| |
|
 | W4 37500 6 WAY TERMINAL STRIP 30 AMP 026BSB000005
Large Image
|
Price: £1.55 (Including: VAT) |
Qty: |
| |
| |
|
 | W4 37531 12 WAY TERMINAL STRIP 2 AMP 026BSB000003
Large Image
|
Price: £1.10 (Including: VAT) |
Qty: |
| |
| |
|
 | W4 37504 12 WAY TERMINAL STRIP 15 AMP 026BSB000004
Large Image
|
Price: £1.09 (Including: VAT) |
Qty: |
| |
| |
 | Open End Terminal Lugs Available in various sizes and quantities |
|
|
|
|
|
|
 | ANCOR 225 PIECE TWIN STARTER KIT 099CNT166248
| Large Image
|
Price: £42.88 (Including: VAT) |
Qty: |
| |
| |
 | Insulated Ring Terminals Pre Insulated Terminals - High quality pre insulated terminals suitable for use with all standard automotive cables from 0.5mm to 6.0mm. All the terminals are U.L. or C.S.A. Approved. Manufactured from tinned copper complete with anti vibration rings (except forks & rings) |
|
|
|
|
|
 | Pre Insulated Terminals - 4.8mm RED - Suitable for Cables 0.5mm2 - 1.5mm2 16/0.20-21/0.30mm
BLUE - Suitable for Cables 1.5mm2 - 2.5mm2 21/0.30-35/0.30mm |
|
|
|
|
|
 | Pre Insulated Terminals - 6.3mm RED - Suitable for Cables 0.5mm2 - 1.5mm2 16/0.20-21/0.30mm
BLUE - Suitable for Cables 1.5mm2 - 2.5mm2 21/0.30-35/0.30mm |
|
|
|
|
|
|
 | FEMALE SPADE CONNECTOR BLUE 6.3mm for 1.5-2.5mm PACK 50 034TRM8-01115-50
|
Price: £2.57 (Including: VAT) |
Qty: |
| |
| |
 | Female Spade Connectors - RED 2.8mm RED - Suitable for Cables 0.5mm2 - 1.5mm2 16/0.20-21/0.30mm |
|
|
|
 | Female Spade Connectors - 4.8mm RED - Suitable for Cables 0.5mm2 - 1.5mm2 16/0.20-21/0.30mm
BLUE - Suitable for Cables 1.5mm2 - 2.5mm2 21/0.30-35/0.30mm |
|
|
|
|
|
 | Piggy Back Spade Connectors - RED 6.3mm RED - Suitable for Cables 0.5mm2 - 1.5mm2 16/0.20-21/0.30mm |
|
|
|
 | Pin Terminals - 1.9mm RED - Suitable for Cables 0.5mm2 - 1.5mm2 16/0.20-21/0.30mm
BLUE - Suitable for Cables 1.5mm2 - 2.5mm2 21/0.30-35/0.30mm |
|
|
|
|
|
 | Heat Shrink Butt Connectors RED - Suitable for Cables 0.5mm2 - 1.5mm2 16/0.20-21/0.30mm
BLUE - Suitable for Cables 1.5mm2 - 2.5mm2 21/0.30-35/0.30mm |
|
|
|
|
|
 | Male Bullet Connectors - 5mm BLUE - Suitable for Cables 1.5mm2 - 2.5mm2 21/0.30-35/0.30mm
YELLOW - Suitable for Cables 3.0mm2 - 6.0mm2 44/0.30-84/0.30mm |
|
|
|
|
|
 | Female Bullet Connectors - 5mm BLUE - Suitable for Cables 1.5mm2 - 2.5mm2 21/0.30-35/0.30mm
YELLOW - Suitable for Cables 3.0mm2 - 6.0mm2 44/0.30-84/0.30mm |
|
|
|
|
|
 | Female Spade Connectors - 9.5mm YELLOW - Suitable for Cables 3.0mm2 - 6.0mm2 44/0.30-84/0.30mm |
|
|
|
 | Pin Terminals - 2.7mm YELLOW - Suitable for Cables 3.0mm2 - 6.0mm2 44/0.30-84/0.30mm |
|
|
|
 | Tinned Copper Terminal Lug s with Inspection Hole CopperTube Terminal With inspection hole, suitable for crimping or soldering. Tinned copper. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 | Open End Terminal Lugs - Tinned Copper Suitable for crimping or soldering. Tinned copper. |
|
|
|
|
|
|
|
|
|
|
|
